-
High-Capacity Mix & Storage Tank
The 1,000-Gallon Mix & Storage Tank provides a high-capacity solution for mixing, storing, and managing drilling fluids for horizontal directional drilling applications. Built for durability and dependable jobsite performance, its large capacity helps maintain an adequate supply of properly mixed drilling fluid for demanding HDD projects.
The tank features a dedicated mixing circuit with four tank guns designed to promote fast, thorough mixing and proper yield. Heavy-duty steel components and large full-port connections provide the durability and fluid-handling capability required for demanding drilling operations.
Key Features
- 1,000-Gallon Capacity: Provides ample drilling fluid storage for larger HDD applications.
- Four Tank Guns: Mixing circuit promotes strong circulation and thorough drilling fluid yield.
- 3-Inch Full-Port Connections: Provides high-volume fluid flow for efficient filling and transfer.
- Shut-Off Valves: Suction and discharge ports feature shut-off valves for improved fluid control.
- Durable Construction: Steel components feature urethane paint for added protection and extended service life.
- Mixing & Storage Capability: Designed to support both drilling fluid preparation and jobsite storage.
- Heavy-Duty Design: Built to withstand the demands of horizontal directional drilling operations.
The 1,000-Gallon Mix & Storage Tank combines high-capacity storage, efficient fluid circulation, and durable construction to provide a dependable drilling fluid solution for a wide range of HDD applications.
-
Portable Breakout Wrench Kit
The Portable Breakout Wrench Kit provides a safe and effective solution for breaking heavily torqued HDD tooling connections. Its compact design makes it easy to position and operate, even in confined jobsite conditions.
Each half of the kit weighs just over 35 lbs, allowing for easier handling and positioning while providing the strength needed to break stubborn threaded connections.
Key Features
- Compact Design: Easy to maneuver and position in tight working areas.
- Portable Construction: Each wrench half weighs just over 35 lbs.
- Safe Breakout Operation: Provides a controlled method for breaking torqued tooling connections.
- Versatile Tooling Range: Designed for tooling with outside diameters from 2-5/8″ to 5″.
- Jobsite Ready: Built for demanding HDD applications and field use.
-
Ditch Witch® Compatible Steep Taper Barracuda Bit
The Ditch Witch® Compatible Steep Taper Barracuda Bit is built for demanding horizontal directional drilling applications in compact soils, cobble, shale, sandstone, caliche, and rock.
Its diamond-shaped cutting profile promotes efficient ground penetration while providing dependable steering and control. Low-profile rear carbides help provide smooth pullback, while extensive carbide coverage delivers aggressive cutting performance and added protection in tough, abrasive ground conditions.
Constructed from durable 4140 steel plate, the Steep Taper Barracuda is designed for strength, extended service life, and reliable performance in challenging HDD applications.
Key Features
- Diamond-Shaped Cutting Profile: Promotes efficient penetration and dependable steering.
- Built for Tough Ground: Designed for compact soils, cobble, shale, sandstone, caliche, and rock.
- Carbide Coverage: Provides aggressive cutting performance and protection in abrasive conditions.
- Low-Profile Rear Carbides: Designed to help provide smooth, efficient pullback.
- Heavy-Duty Construction: Made from durable 4140 steel plate for strength and long service life.
- Compatible Bolt Patterns: Available in configurations compatible with Ditch Witch® and Vermeer® HDD equipment.
Available in multiple sizes.
-
Ditch Witch® Compatible 5-Bolt Hardfaced Bit
Designed for demanding horizontal directional drilling applications, the Ditch Witch® Compatible 5-Bolt Hardfaced Bit provides dependable performance in compact clay, gravel, and other abrasive soil conditions.
The entire perimeter of the bit features carbide-impregnated hardfacing to provide increased wear resistance and protection during demanding drilling applications. Constructed from durable 4140 steel plate, this bit is built for strength, extended service life, and reliable performance.
The 5-bolt configuration provides a secure fit with compatible Ditch Witch® HDD equipment for dependable drilling performance and control.
Key Features
- Carbide Wear Protection: Carbide-impregnated hardfacing helps protect the entire perimeter of the bit against excessive wear.
- Heavy-Duty Construction: Manufactured from durable 4140 steel plate for strength and extended service life.
- Built for Abrasive Ground: Designed for compact clay, gravel, and other abrasive soil conditions.
- 5-Bolt Configuration: Provides a secure, reliable connection with compatible HDD equipment.
- Ditch Witch® Compatible: Designed for use with compatible Ditch Witch® HDD equipment.
Available in multiple sizes.
-
Ditch Witch® Compatible 6-Bolt Hardfaced Bit
Designed for demanding horizontal directional drilling applications, the Ditch Witch® Compatible 6-Bolt Hardfaced Bit provides dependable performance in clay, sand, gravel, alluvial formations, and other abrasive soil conditions.
The entire perimeter of the bit features carbide-impregnated hardfacing to provide increased wear resistance and protection during demanding drilling applications. Constructed from durable 4140 steel plate, this bit is built for strength, extended service life, and reliable performance.
The 6-bolt configuration provides a secure fit with compatible Ditch Witch® HDD equipment for dependable drilling performance and control.
Key Features
- Carbide Wear Protection: Carbide-impregnated hardfacing helps protect the entire perimeter of the bit against excessive wear.
- Heavy-Duty Construction: Manufactured from durable 4140 steel plate for strength and extended service life.
- Built for Abrasive Ground: Designed for clay, sand, gravel, alluvial formations, and other challenging soil conditions.
- 6-Bolt Configuration: Provides a secure, reliable connection with compatible HDD equipment.
- Ditch Witch® Compatible: Designed for use with compatible Ditch Witch® HDD equipment.
Available in multiple sizes.
-
Ditch Witch® Compatible Sabre Bit
Designed for demanding horizontal directional drilling applications, the Ditch Witch® Compatible Sabre Bit delivers aggressive cutting and dependable steering performance in hardpan, cobble, and other challenging ground conditions.
The Sabre features an aggressive cutting profile designed to provide efficient ground penetration while maintaining control through difficult formations. Its rugged construction provides the strength and durability needed for demanding HDD applications where both cutting performance and steering are critical.
Available in 5-bolt and 6-bolt configurations, the Sabre Bit is designed for a secure fit with compatible Ditch Witch® HDD equipment.
Key Features
- Aggressive Cutting Design: Promotes efficient penetration through hard and challenging formations.
- Dependable Steering: Designed to maintain control when drilling through difficult ground conditions.
- Built for Tough Ground: Well suited for hardpan, cobble, and other demanding formations.
- Heavy-Duty Construction: Built for strength, durability, and extended service life.
- 5 & 6-Bolt Configurations: Available for a variety of compatible Ditch Witch® HDD equipment.
- Ditch Witch® Compatible: Designed for use with compatible Ditch Witch® HDD equipment.
Available in multiple sizes.
-
Ditch Witch® Compatible Steep Taper Dome Bit
Designed for demanding horizontal directional drilling applications, the Ditch Witch® Compatible Steep Taper Dome Bit delivers aggressive penetration and dependable performance in hard, compact soils, cobble, and other challenging ground conditions.
The bit features steep tapered carbide cutters with dome carbides designed to promote quick ground penetration and responsive steering through difficult formations. The entire perimeter is protected with carbide-impregnated hard surfacing, providing increased wear resistance in abrasive drilling conditions.
Constructed from durable 4140 steel plate, the Steep Taper Dome Bit is built for strength, extended service life, and reliable performance in demanding HDD applications.
Key Features
- Steep Taper Cutting Design: Promotes quick, aggressive penetration into hard and compact formations.
- Dome Carbide Cutters: Designed to provide durable cutting performance in demanding ground conditions.
- Carbide Wear Protection: Carbide-impregnated hard surfacing helps protect the entire perimeter against excessive wear.
- Dependable Steering: Designed to support responsive steering and control through challenging formations.
- Heavy-Duty Construction: Manufactured from durable 4140 steel plate for strength and extended service life.
- Built for Tough Ground: Designed for hard, compact soils, cobble, and other challenging drilling conditions.
- Compatible Bolt Patterns: Available in configurations compatible with Ditch Witch® and Vermeer® HDD equipment.
Available in multiple sizes.
-
Ditch Witch® Compatible Steep Taper Sabre Bit
Designed for demanding horizontal directional drilling applications, the Ditch Witch® Compatible Steep Taper Sabre Bit delivers aggressive cutting performance in hard, compact soils, cobble, and other challenging ground conditions.
The Sabre features steep tapered carbide cutters designed to promote quick penetration into difficult formations while providing dependable drilling performance. Carbide-impregnated hard surfacing provides additional wear protection, helping extend bit life in abrasive and demanding conditions.
Constructed from durable 4140 steel plate, the Steep Taper Sabre Bit is built for strength, extended service life, and reliable performance in tough HDD applications.
Key Features
- Steep Taper Cutting Design: Promotes quick, aggressive penetration into hard and compact formations.
- Carbide Cutters: Designed for effective cutting performance in compact soils and cobble.
- Carbide Wear Protection: Carbide-impregnated hard surfacing helps protect the bit against excessive wear.
- Heavy-Duty Construction: Manufactured from durable 4140 steel plate for strength and extended service life.
- Built for Tough Ground: Designed for hard, compact soils, cobble, and other challenging drilling conditions.
- 5 & 6-Bolt Configurations: Available for a variety of compatible HDD equipment.
- Ditch Witch® Compatible: Designed for use with compatible Ditch Witch® HDD equipment.
Available in multiple sizes.
-
Ditch Witch Compatible Thrasher Bits
Available in 5-bolt and 6-bolt configurations.
Designed to aggressively cut through hardpan, caliche, sandstone, and other challenging formations, Thrasher bits combine durable construction with an aggressive cutting design for reliable drilling performance.
Whether you’re working in dense soils or abrasive, rocky conditions, these bits provide the cutting power, durability, and control needed to keep your bore moving.
Available in multiple sizes.
-
High-Efficiency Mud Mixing in a Compact Footprint
The Performix PM200 Mud Mixing System provides an efficient, compact solution for mixing bentonite and drilling fluids for horizontal directional drilling applications. Powered by a 6 HP Honda engine, the PM200 is designed to deliver dependable mixing performance while maintaining a compact footprint for convenient jobsite use.
The PM200 offers a range of features and accessories designed to improve the mud mixing process and help contractors efficiently prepare drilling fluids for demanding HDD applications.
-
The Most Complete Bentonite Mud Mixing System in Its Class
The Performix PM365 Mud Mixing System is a powerful, compact solution designed for efficient mixing of bentonite, polymers, and other drilling fluid additives for horizontal directional drilling applications. Powered by a 13 HP Honda engine and featuring a 365 GPM mixing system, the PM365 delivers the performance needed for demanding HDD operations.
A field-proven high-speed jet and venturi system helps shear and yield drilling fluids quickly, producing a consistent, thoroughly mixed drilling mud while helping reduce mixing time on the jobsite.
Key Features
- 365 GPM Mixing Performance: Provides high-volume mixing capability for demanding HDD applications.
- 13 HP Honda Engine: Delivers dependable power for consistent mixing performance.
- High-Speed Jet & Venturi: Designed to quickly shear and yield bentonite and other drilling fluid additives.
- Versatile Fluid Mixing: Handles bentonite, polymers, and a variety of drilling fluid additives.
- Operator-Friendly Controls: Allows operators to manage the mixing process for desired drilling fluid consistency.
- Compact Design: Delivers high-capacity mixing performance while maintaining a practical jobsite footprint.
- Accessible Maintenance Points: Designed to simplify routine maintenance and help minimize downtime.
The Performix PM365 combines high-capacity mixing, compact design, and dependable performance to provide an efficient drilling fluid mixing solution for a wide range of HDD applications.
-
Strategically Engineered Mix Tank
The Performix SL500 System Tank is designed to provide efficient, consistent mixing of bentonite and drilling fluids for horizontal directional drilling applications. Its specialized tank geometry promotes strong fluid movement and helps reduce material settling during the mixing process.
The SL500 features a radius bottom, four tank jets, a front-to-back slope, and a center sump area that work together to improve tank roll and maintain proper circulation throughout the system. Mounted on a heavy-duty skid, the tank maintains a compact 24-inch-wide footprint, making efficient use of valuable trailer space.
Key Features
- Optimized Tank Geometry: Designed to promote effective fluid circulation and mixing action.
- Four Tank Jets: Provide strong fluid movement for efficient mixing and tank roll.
- Radius Bottom Design: Helps reduce settling and promotes consistent circulation.
- Front-to-Back Slope: Directs drilling fluid toward the center sump for improved fluid management.
- Center Sump Area: Helps maintain circulation and simplifies fluid handling.
- Heavy-Duty Skid: Provides a durable, stable platform for demanding jobsite use.
- Compact 24-Inch Width: Designed to maximize available space on HDD trailers.
- Mixer Compatibility: Designed to pair with compatible Performix mud mixing systems for a complete drilling fluid mixing setup.
The Performix SL500 System Tank combines efficient fluid circulation, compact design, and heavy-duty construction to provide a dependable mixing and storage solution for HDD drilling fluids.
-
Hydraulic Safety Tongs
Hydraulic Safety Tongs provide a safe and efficient solution for making up and breaking out threaded HDD tooling connections. Their portable design allows the tongs to be quickly positioned in the field, providing controlled hydraulic power for even the most demanding connections.
Designed for both make-up and breakout applications, these tongs can be operated using either a manual hydraulic hand pump or an electrically powered hydraulic pump, providing flexibility for a variety of jobsite conditions.
Key Features
- High Torque Capability: Models available with torque capacities ranging from 2,600 ft-lbs. to 120,000 ft-lbs.
- Make-Up & Breakout: Designed for both tightening and breaking threaded tooling connections.
- Portable Design: Easily deployed for remote field applications.
- Hydraulic Operation: Provides controlled power for demanding connections.
- Multiple Power Options: Compatible with manual hydraulic hand pumps or electrically operated pumps.
- Improved Jobsite Safety: Provides a controlled alternative for handling high-torque HDD tooling connections.
Product Literature
Download Inrock Product Brochure
-
Silicon Carbide Shaft Seal
The Silicon Carbide Shaft Seal is designed to improve the durability and service life of centrifugal pumps used in HDD mud mixing systems. Built as a direct replacement for traditional ceramic seals, it provides increased resistance to wear, corrosion, and heat in demanding drilling fluid applications.
The silicon carbide construction creates a durable seal that helps prevent water, drilling fluid, and debris from reaching critical pump components. Its direct-fit design allows the existing ceramic seal to be replaced without equipment modifications.
Key Features
- Silicon Carbide Construction: Provides excellent resistance to wear, corrosion, and heat.
- Extended Service Life: Designed to provide up to three times the service life of traditional ceramic seals.
- Direct Replacement: Replaces existing ceramic seals without requiring equipment modifications.
- Improved Sealing: Helps prevent water, drilling fluid, and debris from reaching critical pump components.
- Reduced Friction: Designed to minimize friction for efficient pump operation.
- Equipment Protection: Helps protect bearings and other critical components from premature wear and damage.
- Mud Mixing System Compatibility: Designed for use with compatible centrifugal pumps in HDD mud mixing systems.
The Silicon Carbide Shaft Seal provides a simple, durable upgrade designed to improve pump reliability, reduce maintenance, and extend component life in demanding HDD mud mixing applications.
-
Bent Bits
Bent Bits are designed for horizontal directional drilling applications in softer and abrasive ground conditions, including alluvial soils, clay, sand, and gravel. The bent, over-center design provides increased steering response, helping operators maintain control and make directional adjustments throughout the bore.
Carbide-impregnated hard surfacing protects the entire perimeter of the bit, while the 4140 steel plate construction provides the strength and durability needed for demanding HDD applications.
Key Features
- Bent / Over-Center Design: Provides improved steering response in softer ground conditions.
- Carbide Wear Protection: Carbide-impregnated hard surfacing protects the entire perimeter of the bit.
- 4140 Steel Construction: Heavy-duty steel plate provides strength and extended service life.
- Versatile Ground Conditions: Designed for alluvial soils, clay, sand, gravel, and other softer or abrasive formations.
- 6-Bolt Configuration: Designed for compatible HDD drilling systems.
- Durable Construction: Built to withstand demanding drilling and steering applications.
Available in multiple sizes.
-
Tuff Bits
Tuff Bits are designed for horizontal directional drilling applications in highly abrasive and challenging ground conditions. Their bent, over-center design helps improve steering response while providing the durability needed for demanding drilling environments.
Constructed from S7 tool steel, these bits are built to withstand excessive wear and provide extended service life in abrasive soils and rocky conditions.
Key Features
- Bent / Over-Center Design: Helps improve steering response and directional control.
- S7 Tool Steel Construction: Provides increased durability and wear resistance in highly abrasive conditions.
- Built for Abrasive Ground: Designed for rocky terrain, abrasive soils, and other demanding formations.
- Long Service Life: Heavy-duty construction helps reduce premature wear and replacement frequency.
- Efficient Drilling Performance: Designed to maintain productive cutting and steering in difficult conditions.
- Durable HDD Design: Built for demanding horizontal directional drilling applications.
Available in multiple sizes.
-
Vermeer® Compatible Steep Taper Dome Bits
Vermeer® Compatible Steep Taper Dome Bits are designed for demanding horizontal directional drilling applications where hard, compact, and abrasive ground conditions require aggressive cutting performance. The steep taper design provides effective penetration while helping maintain control through challenging formations.
Strategically positioned carbide cutters and additional carbide protection help improve cutting efficiency and protect critical wear areas, providing dependable performance and extended service life in tough drilling conditions.
Key Features
- Steep Taper Design: Provides aggressive penetration in hard and compact ground conditions.
- Carbide Cutting Protection: Helps protect critical wear areas and extend bit life.
- Built for Tough Ground: Designed for rock, compacted soils, gravel, and other challenging formations.
- Efficient Cutting Action: Helps maintain productive drilling performance in difficult conditions.
- Heavy-Duty Construction: Built to withstand demanding HDD applications.
- Vermeer® Compatible: Designed for use with compatible Vermeer® horizontal directional drilling equipment.
Available in multiple sizes.
-
Vermeer® Compatible Steep Taper Sabre Bit
Designed for demanding horizontal directional drilling applications, the Vermeer® Compatible Steep Taper Sabre Bit delivers aggressive cutting performance in hard rock, compacted soils, gravel, cobble, and other challenging ground conditions.
The Sabre features strategically positioned carbide buttons designed to provide aggressive cutting action and efficient penetration through difficult formations. Additional carbide protection along the cutting edges provides increased wear resistance, helping extend bit life in abrasive and demanding drilling conditions.
Built for strength, durability, and dependable performance, the Steep Taper Sabre Bit provides the cutting action and control needed for tough HDD applications.
Key Features
- Steep Taper Cutting Design: Promotes aggressive penetration into hard and compact formations.
- Carbide Cutting Buttons: Strategically positioned to provide effective cutting action through difficult ground.
- Carbide Edge Protection: Helps protect critical cutting surfaces against excessive wear and abrasion.
- Built for Tough Ground: Designed for hard rock, compacted soils, gravel, cobble, and other challenging formations.
- Dependable Performance: Designed to provide consistent cutting performance and extended service life in demanding HDD applications.
- Vermeer® Compatible: Designed for use with compatible Vermeer® HDD equipment.
Available in multiple sizes.
-
Vermeer-Compatible Steep Taper Barracuda Bits
Designed for demanding drilling conditions, Vermeer-Compatible Steep Taper Barracuda Bits provide aggressive cutting performance in compact, abrasive, and challenging soils. The steep taper design promotes efficient ground penetration while durable construction helps withstand the demands of tough HDD applications.
Built for accuracy, control, and dependable performance, Barracuda Bits are an excellent choice for horizontal directional drilling contractors looking for reliable tooling for their Vermeer-compatible drill setup.
Key Features
- Steep Taper Design: Promotes fast, efficient ground penetration.
- Durable Construction: Built to withstand compact and abrasive soil conditions.
- Controlled Drilling: Designed to support accurate, consistent HDD performance.
- Vermeer Compatible: Designed for use with compatible Vermeer HDD equipment.
- Built for Tough Conditions: Provides dependable performance in demanding drilling applications.
Available in multiple sizes.
-
Vermeer® Compatible Large Hardfaced Bit
Designed for demanding horizontal directional drilling applications, the Vermeer® Compatible Large Hardfaced Bit provides dependable performance in compact, abrasive, and challenging soil conditions.
The entire perimeter of the bit features carbide-impregnated hardfacing to provide increased wear resistance and protection during demanding drilling applications. Constructed from durable 4140 steel plate, this bit is built for strength, extended service life, and reliable performance.
Its larger design makes it well suited for compatible Vermeer® HDD equipment and applications requiring a larger-profile bit.
Key Features
- Carbide Wear Protection: Carbide-impregnated hardfacing helps protect the entire perimeter of the bit against excessive wear.
- Heavy-Duty Construction: Manufactured from durable 4140 steel plate for strength and extended service life.
- Built for Abrasive Ground: Designed for compact, abrasive, and challenging soil conditions.
- Large-Profile Design: Designed for HDD applications requiring a larger-profile bit.
- Vermeer® Compatible: Designed for use with compatible Vermeer® HDD equipment.
Available in multiple sizes.
-
Vermeer® Compatible Small Hardfaced Bit
Designed for horizontal directional drilling in abrasive soil conditions, the Vermeer® Compatible Small Hardfaced Bit provides dependable performance in clay, sand, gravel, and other abrasive formations.
The entire perimeter of the bit features carbide-impregnated hardfacing to provide increased wear resistance and protection during demanding drilling applications. Constructed from durable 4140 steel plate, this bit is built for strength, extended service life, and reliable performance.
Its compact design makes it well suited for compatible Vermeer® HDD equipment and applications requiring a smaller-profile bit.
Key Features
- Carbide Wear Protection: Carbide-impregnated hardfacing helps protect the entire perimeter of the bit against excessive wear.
- Heavy-Duty Construction: Manufactured from durable 4140 steel plate for strength and extended service life.
- Built for Abrasive Ground: Designed for clay, sand, gravel, and other abrasive soil conditions.
- Compact Design: Smaller profile for applications requiring a compact HDD bit.
- Vermeer® Compatible: Designed for use with compatible Vermeer® HDD equipment.
Available in multiple sizes.
-
Vermeer® Compatible Large Raptor Bit
Designed for demanding horizontal directional drilling applications, the Vermeer® Compatible Large Raptor Bit delivers aggressive cutting performance in hard soils, rocky terrain, abrasive conditions, and other challenging ground formations.
The Raptor features a large cutting surface with strategically positioned carbide cutters designed to promote efficient ground penetration and provide increased wear resistance. Its aggressive cutting design helps maintain steady drilling progress through tough and abrasive formations.
Constructed from heavy-duty steel, the Large Raptor Bit is built for strength, extended service life, and dependable performance in demanding HDD applications.
Key Features
- Aggressive Cutting Design: Large cutting surface promotes efficient penetration through difficult formations.
- Carbide Cutters: Durable carbide cutters provide increased wear resistance in abrasive ground conditions.
- Built for Challenging Ground: Designed for hard soils, rocky terrain, and other demanding formations.
- Heavy-Duty Construction: Built for strength, durability, and extended service life.
- Large-Profile Design: Designed for HDD applications requiring a larger-profile bit.
- Vermeer® Compatible: Designed for use with compatible Vermeer® HDD equipment.
Available in multiple sizes.
-
Vermeer® Compatible Raptor Small Bit
Designed for demanding horizontal directional drilling applications, the Vermeer® Compatible Raptor Small Bit provides dependable cutting performance in abrasive soils and other challenging ground conditions.
The Raptor features strategically positioned carbide inserts along the cutting edge to promote smooth, efficient ground penetration while helping reduce snagging. Its angled body design supports consistent cutting and controlled drilling performance through difficult formations.
Constructed from durable 4140 steel plate, the Raptor Small Bit is built for strength, extended service life, and reliable performance in demanding HDD applications.
Key Features
- Carbide Insert Design: Strategically positioned carbide inserts promote smooth, efficient cutting.
- Angled Cutting Design: Helps reduce snagging while supporting consistent drilling performance.
- Heavy-Duty Construction: Manufactured from durable 4140 steel plate for strength and extended service life.
- Built for Abrasive Ground: Designed for abrasive soils and other challenging drilling conditions.
- Compact Design: Smaller profile for HDD applications requiring a compact bit.
- Vermeer® Compatible: Designed for use with compatible Vermeer® HDD equipment.
Available in multiple sizes.
-
Vermeer® Compatible Thrasher Bits
Designed for demanding horizontal directional drilling applications, Vermeer® Compatible Thrasher Bits deliver aggressive cutting performance in hardpan, caliche, sandstone, and other challenging ground conditions.
The Thrasher features aggressive conical carbide cutters positioned at optimized cutting angles to promote efficient ground penetration and dependable drilling performance. The entire perimeter of the bit is protected with carbide-impregnated hard surfacing, providing added wear resistance in tough and abrasive formations.
Constructed from durable 4140 steel plate, Thrasher Bits are built for strength, extended service life, and reliable performance in challenging HDD applications.
Key Features
- Aggressive Cutting Design: Conical carbide cutters promote efficient penetration in difficult formations.
- Carbide Wear Protection: Carbide-impregnated hard surfacing helps protect the perimeter of the bit in abrasive conditions.
- Heavy-Duty Construction: Manufactured from durable 4140 steel plate for strength and extended service life.
- Built for Tough Ground: Designed for hardpan, caliche, sandstone, and other challenging formations.
- Vermeer® Compatible: Designed for use with compatible Vermeer® HDD equipment.
Available in multiple sizes.
-
Common Sizes & Pulling Capacities:
- 5/16″ Cable — Pulling capacity up to 6,000 lbs.
- 3/8″ Cable — Pulling capacity up to 17,600 lbs.
- 3/4″ Cable — Pulling capacity up to 64,800 lbs.
Lengths: Available in 25′ increments.
Additional sizes and lengths are available to meet your specific application requirements.
-
Adapters for 3/4″ & 1″ copper tubing and for wire pulling sock
-
Cutterheads for 3/4″, 1″, 1-1/2″ & 2″ pipe
- Waterline replacement tool
- Zinc plate finish
-
Klein grip for pulling cable for up to 8,000 lbs.
Heavy duty Klein grip for pulling cable for up to 15,000 lbs.
-
Available in a variety of sizes, styles, and configurations from multiple manufacturers to meet your specific pulling application.
Contact us for sizing, availability, and pricing.
